Export limit exceeded: 51005 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1320 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76445 | 1 Cisco | 4 Cisco Open Source Snort3, Cisco Secure Firewall Threat Defense (ftd) Software, Cisco Utd Snort Ips Engine Software and 1 more | 2026-10-23 | 5.3 Medium |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the detection engine to unexpectedly restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a flaw in logic handling when General Packet Radio Service (GPRS) Tunneling Protocol (GTP) extension headers are processed within the codec. An attacker could exploit this vulnerability by sending a crafted, fragmented UDP datagram that contains these headers to the Snort 3 Detection Engine of an affected device. A successful exploit could allow the attacker to cause the detection engine to enter an infinite loop, resulting in a DoS condition. | ||||
| CVE-2026-98489 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-101620 | 1 Oracle | 2 Mysql Cluster, Mysql Server | 2026-10-23 | 6.5 Medium |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3; MySQL Cluster: 9.7.0-9.7.3. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-98488 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range hw_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-71227 | 2 Redhat, Smuellerdd | 8 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 5 more | 2026-10-22 | 5.1 Medium |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. | ||||
| CVE-2026-91418 | 1 Oracle | 5 Graalvm, Graalvm For Jdk, Java Se and 2 more | 2026-10-22 | 5.3 Medium |
| Vulnerability in the Oracle Java SE, Oracle JavaFX, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: ImageIO). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle JavaFX: 21.0.12, 25.0.4, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle JavaFX, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle JavaFX, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). | ||||
| CVE-2026-110354 | 1 Haproxy | 4 Haproxy, Haproxy Enterprise, Kubernetes Ingress Controller and 1 more | 2026-10-22 | 7.5 High |
| HAProxy 3 before 3.4.6 allows a remote unauthenticated attacker to cause a denial of service (persistent worker-thread CPU exhaustion) via an HTTP/1.1 chunked request. Although the H1 multiplexer drains the request before closing the stream, the parser repeatedly re-processes the same bytes without making progress. The affected thread stays busy at 100% CPU after timeouts expire and after the client disconnects, and repeated requests can consume all worker threads until the process is restarted. | ||||
| CVE-2026-110353 | 1 Haproxy | 4 Haproxy, Haproxy Enterprise, Kubernetes Ingress Controller and 1 more | 2026-10-22 | 7.5 High |
| HAProxy 3.2 before 3.4.6 allows a remote unauthenticated attacker to cause a denial of service (worker-thread CPU exhaustion) via a truncated HTTP/2 PING frame. h2c_handle_ping in src/mux_h2.c does not check for a short read, unlike the other H2 frame handlers. Because the incomplete frame cannot be processed, its data is never consumed, and the H2 multiplexer tasklet is repeatedly woken by that pending data without making progress. The CPU spins until timeout http-request closes the connection, and an attacker opening many such connections can sustain high CPU usage. | ||||
| CVE-2026-106565 | 1 Imagemagick | 1 Imagemagick | 2026-10-22 | 5.9 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32 and 6.9.13-57, a missing end-of-file check while reading bzip2-compressed image data can cause an infinite loop and exhaust processing resources. This issue is fixed in versions 7.1.2-32 and 6.9.13-57. | ||||
| CVE-2026-106567 | 1 Imagemagick | 1 Imagemagick | 2026-10-22 | 5.9 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32 and 6.9.13-57, a crafted PSD file can trigger an integer-conversion error in the PSD decoder on 32-bit builds, causing an infinite loop and denial of service. This issue is fixed in versions 7.1.2-32 and 6.9.13-57. | ||||
| CVE-2026-106568 | 1 Imagemagick | 1 Imagemagick | 2026-10-22 | 5.3 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32 and 6.9.13-57, a crafted XMP profile embedded in an image can cause the profile parser to enter an infinite loop, preventing image processing from completing. This issue is fixed in versions 7.1.2-32 and 6.9.13-57. | ||||
| CVE-2026-98123 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and the watchdog reports a soft lockup. All reads stay within the received skb, so the lockup is a pure remote denial of service. A remote peer can trigger it with a crafted ASCONF-ACK on an ADD-IP enabled association with an outstanding ASCONF (RFC 5061 section 4.1.2 requires the chunk to be authenticated, but the predefined empty key id 0 allows the peer to compute the same association HMAC from publicly exchanged parameters, so the gate does not help). The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs no length check, letting a parameter without a complete error header reach the consumer, which reads errhdr.cause past the end of the parameter, an out-of-bounds read. Reject SCTP_PARAM_ERR_CAUSE parameters shorter than sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the verifier, and advance the consumer iterator with the same padding rule as the verifier to keep the two walks in lockstep. The verifier change guarantees a complete error header in every ERR_CAUSE parameter the consumer can see, so the consumer's asconf_ack_len check is dropped and it returns err_param->cause directly. The consumer padding fix is still required because odd lengths remain valid for SCTP_PARAM_ERR_CAUSE per RFC 5061. The issue was found by ZeroHive, a vulnerability hunting agent at Tencent Yunding Lab. | ||||
| CVE-2026-20019 | 1 Cisco | 4 Cisco Open Source Snort3, Cisco Secure Firewall Threat Defense (ftd) Software, Cisco Utd Snort Ips Engine Software and 1 more | 2026-10-22 | 5.8 Medium |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 NetFlow Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 parses UDP Netflow Protocol packets. An attacker could exploit this vulnerability by sending a single crafted Netflow packet through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition. | ||||
| CVE-2026-96642 | 1 Python-pillow | 1 Pillow | 2026-10-22 | 6.5 Medium |
| Pillow is a Python imaging library. Prior to 13.0.0, the TarIO initializer in src/PIL/TarIO.py accepts a negative octal member size and computes a backward seek that returns to the same 512-byte header. When the requested member name does not match, the parser repeatedly reads that header, consumes a full CPU core, and never returns. TarIO is reached only when an application directly uses PIL.TarIO.TarIO rather than the default Image.open() path. This issue is fixed in version 13.0.0. | ||||
| CVE-2026-113793 | 1 Py-pdf | 1 Pypdf | 2026-10-22 | 5.5 Medium |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, removing an object from a crafted cyclic PDF tree, such as an outline item, can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. | ||||
| CVE-2026-113792 | 1 Py-pdf | 1 Pypdf | 2026-10-22 | 5.5 Medium |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, calling PdfWriter.find_outline_item on a crafted PDF with a cyclic outline hierarchy can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. | ||||
| CVE-2026-113794 | 1 Py-pdf | 1 Pypdf | 2026-10-22 | 5.5 Medium |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0. | ||||
| CVE-2026-114095 | 2 Dulwich Project, Jelmer | 2 Dulwich, Dulwich | 2026-10-21 | 6.5 Medium |
| Dulwich before 1.2.9 contains a denial of service vulnerability in Pack.resolve_object that allows attackers to cause infinite recursion via self-referential OFS_DELTA objects. Attackers can supply a malicious packfile with an OFS_DELTA delta_offset of 0 to exhaust CPU during clone, fetch, or cat-file operations. | ||||
| CVE-2026-92454 | 1 Eclipse | 1 Threadx Guix | 2026-10-21 | 6.1 Medium |
| The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled. | ||||
| CVE-2024-47794 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent tailcall infinite loop caused by freplace There is a potential infinite loop issue that can occur when using a combination of tail calls and freplace. In an upcoming selftest, the attach target for entry_freplace of tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in entry_freplace leads to entry_tc. This results in an infinite loop: entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc. The problem arises because the tail_call_cnt in entry_freplace resets to zero each time entry_freplace is executed, causing the tail call mechanism to never terminate, eventually leading to a kernel panic. To fix this issue, the solution is twofold: 1. Prevent updating a program extended by an freplace program to a prog_array map. 2. Prevent extending a program that is already part of a prog_array map with an freplace program. This ensures that: * If a program or its subprogram has been extended by an freplace program, it can no longer be updated to a prog_array map. * If a program has been added to a prog_array map, neither it nor its subprograms can be extended by an freplace program. Moreover, an extension program should not be tailcalled. As such, return -EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a prog_array map. Additionally, fix a minor code style issue by replacing eight spaces with a tab for proper formatting. | ||||