| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: zero at allocation time
There are occasional LLM hints wrt. leaking uninitialized data to
userspace via ctnetlink. Just zero at allocation time,
expectations are not frequently used these days.
Intentionally keeps _init as-is because we could theoretically
support re-init, so add the missing exp->dir there. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
parport: Fix race between port and client registration
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
host1x: bus: Fix missing ops null check in error teardown
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gsp: add SEC2 to GA100 chip table
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot. |
| Improper certificate validation in Active Directory Federation Services (AD FS) allows an unauthorized attacker to perform spoofing over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE
errata_probe_ghostwrite() only marks the CPU as vulnerable when it is
called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation
in ghostwrite_enable_mitigation() only takes effect if the vulnerable
state was recorded before the boot alternatives are patched.
The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY
is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a
kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the
early alternatives never run, so ghostwrite_state is never set to
VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector
remains enabled, and sysfs reports "Not affected" on a vulnerable
T-Head C9xx CPU.
Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the
vulnerability is detected in the early boot stage and the default
mitigation is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_connect_bpf_populate() fills connect.port and connect.v6_addr for
AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28
bytes.
The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which
already holds sin6_port and sin6_addr. io_connect() passes addr_len to
the socket layer unchanged.
At addr_len 24 the filter sees family AF_INET6 with port and address
zero, while the kernel connects to the real destination. A filter that
denies an IPv6 port or address is bypassed. Denying connect.port == P
rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24.
Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when
absent.
The threshold mismatch was found by an AI coding assistant (Claude Code)
comparing this hook against the net/ipv6 length checks on my
instructions; it also drafted the reproducer and this patch. I verified
the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same
code. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: keep the lock on a mount that a propagated copy is moved beneath
attach_recursive_mnt() transfers MNT_LOCKED from the top mount to the
mount that is moved beneath it with MOVE_MOUNT_BENEATH. This allows the
owner of a user namespace to replace its locked /proc or its root. The
mount beneath takes on the job of covering the underlying mountpoint
allowing the top mount to be unmounted.
Consider two mount namespaces:
(H) The host H has a shared mount P with a secret in P/d
(Z) Z is a user namespace made from M. Its copy of P receives
propagation from the host's P and its copy of M's cover on P/d is
locked Z's owner must not get to see P/d.
Now (H) mounts X on P/d. This propagates into (Z). The copy of X lands
beneath (Z)'s locked cover. The locked property is transfered from (Z)'s
cover to the copy of X propagated beneath it. The cover is now unlocked.
Now (H) unmounts X again. The copy of X in (Z) gets unmounted and the
covering mount is left unlocked on top of P/d. (Z) can now unmount it:
Z: umount2(P/d) = EINVAL /* the cover is locked */
H: mount X on P/d, umount X /* both propagate into Z /*
Z: umount2(P/d) = 0 /* the cover is now unlocked */
Z: read P/d/secret = "covered-by-root" /* secret revealed */
So only transfer the locked property to the mount beneath for mounts the
caller has placed. A propagated copy that lands beneath a locked mount
is locked as well so that the mount at the bottom of the stack carries a
lock the way every check expects. The mount on top of it remains locked
to ensure that it keeps covering even if the propagated mount is
unmounted again. |
| In the Linux kernel, the following vulnerability has been resolved:
namei: don't reveal overmounted entries in refwalk
In rcuwalk the dentry is validated before it is accepted. step_into()
step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock.
An entry that gets unlinked in between causes the lookup to retry and
miss.
A refwalk doesn't do this. lookup_fast() takes a reference on the hashed
dentry and simply accepts it. So an unlink that happens after the
reference was taken isn't seen by refwalk. That's fine for a simple
file. We just happened to open it before it was unlinked, no problem.
For a mountpoint and specifically a locked mountpoint it very much
isn't. The unlink detaches all mounts and then removes the name. Any
refwalk that hasn't traversed the mounts yet simply reveals the
underlying entry. It's a very narrow window but it can be hit:
reads of a covered file in 60 s, 3 walkers, ~15000 unlinks
no widening 27
that step + 200 us 3741
See the appended patch for a more reliable reproducer.
So check the entry after step_into(). unlink(), rmdir() and rename()
mark the dentry with dont_mount() before they detach the mounts and
remove the dentry.
So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the
time its mounts were looked at is a name that was unlinked under the
refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and
it is set before they are detached by detach_mounts(). A refwalk that
missed the mounts will see DCACHE_CANT_MOUNT.
Plain d_unlinked() is fine. A rename takes the dentry off its hash chain
but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename
over the dentry unhash it. The only move that flips IS_ROOT splices in a
disconnected alias. That doesn't have DCACHE_CANT_MOUNT set.
Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately
land on an unhashed directory. A refwalk that crossed onto a mount has
path.mnt different from nd->path.mnt. A dentry that a filesystem dropped
on its own (d_invalidate(), d_drop()) doesn't have the flag set and is
treated as before.
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against walkers that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 while there is none */
static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: unhash a dentry before detaching the mounts on it
unlink(), rmdir() and rename() remove the entry from the filesystem,
call detach_mounts() on the entry with the inode locked and then call
d_delete() once the inode is unlocked.
The thing is that between detach_mounts() and d_delete() the dentry is
still hashed and positive. But after detach_mounts() nothing covers the
dentry anymore. A lookup that finds this dentry in the dcache can
uncover what the mounts hid.
That's a problem when unlinking files or directories that are
mountpoints in other mount namespaces. Everybody who had the underlying
entry covered can race the detach_mount() call until d_delete() has run.
The race window isn't all that small. It encompasses namespace_unlock()
with a full synchronize_rcu_expedited() grace period and the
inode_unlock() of the entry.
In my experiments three walkers that kept trying read an overmounted
file in 11938 of the 16140 unlinks that removed its mountpoint from a
bind mount of the filesystem within a minute.
Fun fact, d_invalidate() has the same ordering problem but gets it
right. It unhashes the dentry first and detaches the mounts afterwards.
Let's do the same in __detach_mounts():
- A lookup that hasn't found the dentry yet misses it in the dcache and
waits for the directory lock that the caller holds until the name is
gone for good.
- A lockless lookup that found it already fails the mount_lock check
while the dentry still counts as a mountpoint and the d_seq check once
it doesn't, and retries.
This fixes the lockless path. We still need to fix the reference count
lookup in a follow-up patch.
So d_drop() the dentry. The dentry stays positive and held but can't be
found anymore. Then proceed with the detach and unlink.
Reproducer:
The reads were counted with the program below, three walkers for 60 s
in a VM with 4 CPUs. The race window is stretched with the debug patch
pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it
found a mountpoint dentry and before its mounts are crossed.
fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts()
and d_delete().
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against lookups that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 wh
---truncated--- |
