| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix lease break and ack state handling
Do not skip valid lease states containing WRITE_CACHING when breaking
level-II/read leases for writes and truncates.
Handle lease break acknowledgments according to the SMB2 rule that the
acknowledged state must be a subset of the server's break target. Apply
the acknowledged state directly and keep the break pending on failed ACKs. |
| On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFileW() and opens a device instead of the regular file the application expected, which can block or hang the request and exhaust worker processes. |
| PraisonAI is a multi-agent teams system. From version 4.5.110 to before version 4.6.61, praisonai.sandbox.SandlockSandbox is documented and implemented as the kernel-enforced sandbox backend for untrusted code. Its SandboxConfig.native() path lets callers configure allowed filesystem paths and network=False. On systems where the optional sandlock module imports but reports that Landlock is unavailable, SandlockSandbox.execute() and run_command() do not fail closed. They silently fall back to SubprocessSandbox(self.config). That fallback keeps the same high-level native policy object but does not enforce the native filesystem or network boundary during code execution. A sandboxed payload can read files outside the configured allowed path and open network connections despite network=False. This issue has been patched in version 4.6.61. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. From 1.6.1 until 1.6.2, a successful MMS ObtainFile operation closes MmsObtainFileTask::fileHandle but leaves the stale non-NULL value in a task marked MMS_FILE_UPLOAD_STATE_NOT_USED. If a later ObtainFile request reuses that task and destination creation fails, MMS_FILE_UPLOAD_STATE_SEND_OBTAIN_FILE_ERROR_DESTINATION cleanup closes the stale FILE object again. Servers with the MMS file service and ObtainFile enabled can therefore be crashed remotely by the success-then-failure request sequence. This issue is fixed in version 1.6.2. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: drain and invalidate before server-side copy/clone
cifs_file_copychunk_range() and the clone (FICLONE) path of
cifs_remap_file_range() do not serialise the destination page cache
against the server-side copy the way the other server-side range
operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range()
and smb3_insert_range()) do.
cifs_file_copychunk_range() invalidates the destination range with
filemap_invalidate_inode(), which takes and drops the mapping's
invalidate_lock internally, so the lock is no longer held when the
copychunk ioctl is issued. It also never drains in-flight netfs I/O on
the target. The clone path never takes the invalidate_lock at all (only
i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not
drain outstanding I/O.
As a result an asynchronous destination writeback can complete after the
server-side copy/clone has run and reinstate stale data over the region
just written by the server, corrupting the file. This is the same class
of corruption as commit d7d2adcd022b ("smb/client: flush dirty data
before punching a hole") and has been seen randomly in generic/363
against Windows Server.
Fix both paths to follow the established ordering: hold the target
mapping's invalidate_lock across the flush and invalidation of the
destination and the server ioctl, and call netfs_wait_for_outstanding_io()
on the target to drain in-flight writes before the ioctl is issued. Only
the target inode's invalidate_lock is required, as the source is merely
flushed and not invalidated; i_rwsem (already held via
lock_two_nondirectories()) is acquired before the invalidate_lock,
matching the VFS lock ordering. Since filemap_invalidate_inode() takes
that same lock internally, replace it with its own unmap/flush/invalidate
steps instead of calling it, and return early on a zero-length copy to
avoid a range underflow. |
| DBI versions before 1.656 for Perl hang on a later open of a DBD::DBM table because a failed open_data does not release the table's lock.
open_data creates the table's lock file and takes an exclusive flock on it for a CREATE, before the checks that can croak: a dbm_mldbm value that is not a module name, a failing tie, or a missing data file. The croak unwinds before the table object is blessed, so nothing releases the lock, and the meta data holding the open descriptor stays cached on the database handle.
The dbm_mldbm and dbm_type values come from the DSN or the connect attributes, so a caller that chooses the serializer or the storage backend can trigger the failure.
The flock has no timeout, so a later open of that table (even through a separate database handle) blocks for as long as the handle holding the stale lock lives, in the same process or any other. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: add wcid publish check in mt76_sta_add
Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.
Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.
wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).
mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib] |
| VaadinService.requestEnd() in Vaadin Framework 8 locks the session and then reads the v-uiId request parameter outside the block that releases the lock. A request carrying a non-numeric v-uiId makes Integer.parseInt throw while the session lock is held, so the lock is never released and the container thread returns to its pool still owning it. Every later request to that session then blocks forever in VaadinService.lockSession(), and repeating the request exhausts the thread pool and takes the application down. No authentication is required: a session cookie, which any client obtains with a single request, is enough. Vaadin 10 and later are not affected, because Flow releases the lock in a finally block and does not read that parameter there, and Vaadin Framework 7 is not affected either.
Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include:
Product version
Vaadin Framework 8.16.0 - 8.32.1
Mitigation
Upgrade to 8.32.2
Vaadin Framework 7 and Vaadin 10 and later do not carry this behaviour and need no upgrade for this issue.
Artifacts
Maven coordinates / Vulnerable versions / Fixed version
com.vaadin:vaadin-server / 8.16.0 - 8.32.1 / >=8.32.2
com.vaadin:vaadin-server-mpr-jakarta / 8.18.0 - 8.32.1 / >=8.32.2 |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76408 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a CSS scoping bypass in HTML messages. rcube_utils::mod_css_styles() did not treat an at-rule prologue such as @layer a; as a selector boundary, and did not handle selectors beginning with ::, so selectors following an at-rule were left unscoped and applied to the whole Roundcube interface instead of being confined to the message body. This allows an HTML message to restyle application chrome for UI redressing and spoofing. Upstream fixed this in the commit “Fix CSS scoping bypass in HTML messages using at-rules”. |
| In OpenStack Cinder through 29.0.0, cross-project information disclosure can occur in the Messages API. A non-admin user with the project-scoped 'member' or 'reader' role making the Block Storage API v3.3 "List messages" call finds the non-expired user messages for other projects included in the response, resulting in the leakage of UUIDs of resources owned by other projects, in addition to the user message about the other projects' resources (which, by design, are sanitized generic messages). All Cinder deployments are affected. |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.0.9, ReadWriteLock and AsyncReadWriteLock versions from 3.20.4 resolve the lock path and pass it to SQLite without rejecting a final symbolic link, allowing another local user who can create names in the lock directory to redirect database creation and locking or split mutual exclusion between targets. This issue is fixed in version 4.0.9. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
