| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected.
An authenticated client without any permission on the target topic, namespace or tenant could use these commands to:
- read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed.
- register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator.
The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first.
This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.
This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user.
As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy.
The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace.
This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure. |
| The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected.
As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement.
The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant.
The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure. |
| Apache Traffic Server allows request smuggling via HEAD requests that carry Content-Length or Transfer-Encoding.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| The Apache Airflow Keycloak auth manager did not end the session on logout: the logout route revoked the presented token, but `KeycloakJWTMiddleware` then issued a new, unrevoked token on the same response, so the user stayed logged in. Deployments using the Keycloak auth manager are affected: after a user logs out, anyone with later access to the same browser (for example on a shared workstation) can continue to act as that user.
Users of apache-airflow-providers-keycloak are recommended to upgrade to apache-airflow-providers-keycloak 0.11.1 or later. |
| Pass-through of unvalidated KMS URLs to KMS clients in Apache C++ Parquet and PyArrow versions 4.0.0 to 25.0.1.
This affects users who read Parquet files and configure Parquet decryption properties with a KmsClient implementation.
On the reader side, the KMS URL can be application-controlled (specified in the KmsConnectionConfig) or file-controlled.
If the user does not leverage application control for this parameter, a file-controlled KMS URL is forwarded to a pluggable KmsClient implementation.
If the KMS implementation does not perform host validation and makes use of the provided KMS URL, a KMS token can be sent to a malicious host set by an attacker in the file.
Users are recommended to upgrade to version 26.0.0, which disables this behavior by default and requires that users opt-in to it by enabling the read_kms_url flag in the DecryptionConfiguration. Users of affected versions are recommended to either specify the KMS URL in the KmsConnectionConfig when reading files, or ensure any KmsClient implementations validate received KMS URLs. Users that opt-in to file-controlled KMS URLs in version 26.0.0 and later must ensure KmsClients validate KMS URLs. |
| Out-of-bounds Write vulnerability in Apache HTTP Server's mod_proxy_html with crafted HTTP response bodies.
This issue affects Apache HTTP Server version 2.4.68. |
| A missing critical step in authentication vulnerability in Apache Tomcat when the JNDI realm was configured with with a non GSSAPI SASL authentication mechanism allowed attackers to authenticate without providing the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Apache Johnzon.
ClassConverter loads & static-initializes an attacker-named class from untrusted JSON.
This issue affects Apache Johnzon: from 1.0.0 before 2.2.0.
Users are recommended to upgrade to version 1.3.1 (javax namespace) or 2.2.0 (jakarta specification namespace), which fixes the issue. |
| Apache Airflow Amazon provider: the AWS auth manager's SAML login flow does not bind the authentication response to the browser that began it. The login handler discards the AuthnRequest ID and the callback validates the assertion without requiring a matching InResponseTo, so an unauthenticated attacker who can cause a victim to load a page can complete a SAML login in the victim's browser using the attacker's own assertion, silently logging the victim into the attacker's Airflow account. Subsequent work the victim performs lands in a session the attacker controls.
Affects deployments using the AWS auth manager with SAML authentication. The victim needs only to visit an attacker-controlled page; no Airflow account or credential is required of the attacker. This is the same login-CSRF class fixed in the Keycloak auth manager as CVE-2026-40948.
Users of apache-airflow-providers-amazon are recommended to upgrade to version 9.38.0, which fixes the issue. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper restriction of recursive entity references in DTDs ('XML entity expansion') vulnerability in Apache Cocoon.
This issue affects Apache Cocoon: all versions. XEE in the fp: form processor could lead to SSRF, including exposing files from the server to an untrusted external system
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Apache Cocoon.
This issue affects Apache Cocoon: all versions.
Missing input sanitation would allow arbitrary SQL injection through the SQL processor or sql:/esql: logicsheets.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| ** UNSUPPORTED WHEN ASSIGNED ** Use of cache containing sensitive information vulnerability in Apache Cocoon. When using the cache on a multi-user application, cached values for one user could be used when serving content for other users.
This issue affects Apache Cocoon: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| ** UNSUPPORTED WHEN ASSIGNED ** Exposure of sensitive system information to an unauthorized control sphere vulnerability in Apache Cocoon. An unauthenticated user could gain access to diagnostic interfaces, including triggering of cache, exposure of (verbose) debug logging and profile information.
This issue affects Apache Cocoon: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| An unvalidated runtime configuration value in Apache CouchDB 3.5.2 and below on all platforms allows a CouchDB server admin to run arbitrary shell commands as the CouchDB operating system user.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| An unlimited gzip decompression routine in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any remote client to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| A missing circuit-breaker in the replicator in Apache CouchDB 3.5.2 and below on all platforms allows the owner of a replication source or target to cause a denial of service via creating an infinite HTTP redirect loop.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| Unsafe binary deserialisation in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
