| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. |
| When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way.
An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability.
This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process.
Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet.
Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client.
Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536. |
| The Discovery naming-service reply parser in Apache bRPC (versions < 1.18.0) calls RapidJSON object-only accessors (FindMember) on JSON values without first validating that those values are objects. A malformed Discovery response whose data/service members or instances list contain non-object entries (e.g. a bare integer) triggers the RapidJSON object-access precondition on the client, reading memory out of bounds and potentially crashing the bRPC client.
Root Cause:
In src/brpc/policy/discovery_naming_service.cpp, DiscoveryNamingService::GetServers() and DiscoveryNames::ListDiscoveryNodes() access JSON values with member functions on non-object values. RapidJSON only defines these operations for object types; invoking them on a non-object violates the class invariant and results in undefined behavior (out-of-bounds read), commonly crashing the process.
Affected Scenarios:
An operator-configured (or compromised) Discovery backend returns a malformed /discovery/nodes or /discovery/fetchs response whose data/service/instance entries are not JSON objects, crashing any bRPC client that refreshes its server list.
How to Fix:
1. Upgrade bRPC to version 1.18.0 or later, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3533
The fix validates that the Discovery response data, per-service data, and instance entries are JSON objects (and skips non-object node/instance entries and rejects non-object data/service values) before calling member accessors. |
| NULL pointer dereference in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to crash the server (denial of service) via a crafted createStream command.
Root Cause:
When an RTMP service rejects a createStream request by returning a null stream from RtmpService::NewStream(), the server sends an error response to the client. If writing this rejection response fails (for example, because the client closes the connection immediately after sending the createStream command), the error-handling path in RtmpChunkStream::OnCreateStream() dereferences the null stream pointer to access stream->_onfail_id, causing the process to crash.
Affected Scenarios:
Run an Apache bRPC RTMP server whose RtmpService::NewStream() may return null (i.e., the service rejects createStream requests). A remote client that sends a createStream command and then closes the connection before the rejection response is written can crash the server.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3508 |
| Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count.
Root Cause:
The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts.
Affected Scenarios:
Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3451
Note:
No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. |
| A vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
A verification code issued for one email-based workflow could be accepted by another sensitive workflow because the code purpose was not properly enforced.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Out-of-bounds read and write in the Count-Min sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
count_min_sketch::deserialize() did not include the preamble in its input size check, so a truncated sketch could cause a read of up to 16 bytes past the end of the input. In addition, the table size was computed from the serialized number of buckets and number of hash functions in 32-bit arithmetic. A crafted sketch could make it wrap to zero, so that the sketch deserialized with an empty table, and later updates and estimate queries read and wrote outside the heap allocation. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 4.1.0 before 5.3.0. Only applications that deserialize Count-Min sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. |
| Apache Pulsar allows an administrator to require end-to-end message encryption for all topics in a namespace by setting the encryption_required namespace policy. When this policy is set, the broker rejects messages that are published without encryption.
When the broker loads a persistent topic, it reads the namespace policies and the topic-level policies as part of topic initialization. If a step of this initialization fails, for example because of an error reading from the metadata store, a failure loading the topic-level policies or a failure in a later initialization step, the broker logs a warning, disables the encryption requirement for that topic, and completes the topic load as if it had succeeded. The topic is then served with encryption_required not enforced, even though the namespace policy requires it. Topic-level policies that could not be loaded are also not applied.
While the encryption requirement is not enforced, an authenticated client with permission to produce to the affected topic can publish messages that are not encrypted, and the broker accepts and stores them. This applies both to producers created after the topic was loaded and to producers that were already connected. Messages published with encryption remain encrypted; the issue does not expose the content of encrypted messages or the encryption keys.
The condition is not limited to transient failures. If the cause of the initialization failure persists, the encryption requirement is disabled again each time the topic is loaded, for example after a topic unload, a namespace bundle reassignment or a broker restart. An update to the namespace policies restores enforcement on a loaded topic, but only until the topic is loaded again. Enforcement is reliably restored only once the underlying cause of the failure has been resolved and the topic has been loaded again. The broker logs a warning when the encryption requirement is disabled, but the topic load is reported as successful and the state of the encryption requirement is not shown in the topic statistics.
In fixed versions, a failure during topic initialization causes the topic load to fail so that it can be retried, instead of loading the topic with the encryption requirement disabled.
This issue affects Apache Pulsar versions from 1.22.0-incubating before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who rely on encryption_required and cannot upgrade immediately can monitor the broker logs for warnings containing "isEncryptionRequired will be set to false" (the exact wording of the message differs between releases), resolve the underlying cause of the failure, and then reload the affected topic and confirm that the warning does not recur. |
| The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions.
As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.
The practical impact is limited by two broker configuration requirements, neither of which is met by default:
- Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker.
- Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch.
In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints.
This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 3.3.x and 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch. |
| Apache Traffic Server can crash with a null pointer dereference when a client POST request is torn down via half-close while a chunked origin response is being reparsed from a reentrant write-ready callback, a timing-dependent race introduced by the CVE-2021-32564 flow-control backports.
This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server can stall a chunked transfer that it passes through with its trailers removed (proxy.config.http.drop_chunked_trailers) until the connection times out, because it waits for the trailer bytes it has already dropped. Trailer dropping is on by default in 10.x. In 8.1.11 and 9.2.x it is off by default, and those versions are affected only if it is enabled.
This issue affects Apache Traffic Server: 8.1.11, from 9.2.5 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 10.1.5 or 10.2.1, which fix the issue. |
| Apache Traffic Server forwarded a malformed 302 response that should have been rejected as a parse error, because the Transfer-Encoding: chunked carve-out bypassed the rejection path. A response that two peers can read differently is then stored and served, allowing cache poisoning and response-framing desync.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server 9.2.15, 10.1.4 and 10.2.0 write one unthrottled diagnostic log line for every internal @ header they strip, so a request carrying many such headers makes the proxy write far more log data than the request contains.
This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a malformed padded HTTP/2 DATA frame.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a truncated HTTP/2 Content-Length value.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
