| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free iov when btrfs_uring_read_extent() fails
After btrfs_uring_read_extent(), the caller always jumped to out_acct.
That skips kfree(data->iov), which is only correct for -EIOCBQUEUED
where the deferred path owns the iov. On failure, fall through to
out_free instead. |
| Vulnerability in Oracle Java SE (component: Networking). The supported version that is affected is Oracle Java SE: 27. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ch: Do not keep references to data transfer element devices
ch_readconfig() looks up the scsi_device of every data transfer element
whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in
ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops
it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere
else - it only supplies the vendor, model and revision printed in the same
loop.
Once such a drive is removed, its scsi_device can never be released. It
stays on the host's device list at its address, so a new device there is
refused by anything that walks the list - target_core_pscsi reports
"scsi_device_get() failed for H:C:T:L" - and the low-level driver's module
can no longer be unloaded. Only a reboot recovers.
It shows with any changer that reports its drives' ids; with the mhvtl
virtual library (IBM 3573-TL personality), each create and remove of a
library with four drives leaves four references behind, counted by the
module's use count in lsmod. With ch not bound the count is unchanged, and
with this patch applied it is unchanged too.
Drop the reference as soon as the name has been printed, and remove the now
unused dt[] array. That also removes the array leaked when ch_probe() fails
after ch_readconfig().
The same leak was reported with an RFC patch in 2022, which was not merged. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop
In the dmaengine path the driver pre-submits RX buffers and holds
in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed
only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync()
aborts these descriptors without running their callbacks, and the driver
then frees only the ring shells, leaking every SKB still owned by the
engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted
per channel, the mapping leak can eventually exhaust a limited IOMMU
aperture.
Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a
slot that still owns a live, DMA-mapped buffer, and on stop unmap and free
every such buffer.
axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on
each completion, so it can race axienet_stop(): a completion may submit a
fresh buffer after dmaengine_terminate_sync() has returned, leaving the
channel armed with a buffer the teardown then frees while the engine may
still write into it (dma_release_channel() does not stop it either). Add a
lock that axienet_dma_rx_cb() holds across the @stopping check and the
resubmit, and axienet_stop() holds to set @stopping before terminating.
Once @stopping is set no callback can arm a new buffer, and any armed just
before is aborted by the terminate, so teardown only frees buffers the
engine no longer owns. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions up to and including 0.9-rc5, the simple protocol server ignores the documented client limit and accepts unlimited connections, allowing for easy local DoS. Although `CLIENTS_MAX` is defined, `server_work()` unconditionally `accept()`s and `client_new()` always appends the new client and increments `n_clients`. There is no check against the limit. When client cannot be accepted as a result of maximal socket number of avahi-daemon, it logs unconditionally error per each connection. Unprivileged local users can exhaust daemon memory and file descriptors, causing a denial of service system-wide for mDNS/DNS-SD. Exhausting local file descriptors causes increased system load caused by logging errors of each of request. Overloading prevents glibc calls using nss-mdns plugins to resolve `*.local.` names and link-local addresses. As of time of publication, no known patched versions are available, but a candidate fix is available in pull request 808, and some workarounds are available. Simple clients are offered for nss-mdns package functionality. It is not possible to disable the unix socket `/run/avahi-daemon/socket`, but resolution requests received via DBus are not affected directly. Tools avahi-resolve, avahi-resolve-address and avahi-resolve-host-name are not affected, they use DBus interface. It is possible to change permissions of unix socket after avahi-daemon is started. But avahi-daemon does not provide any configuration for it. Additional access restrictions like SELinux can also prevent unwanted tools to access the socket and keep resolution working for trusted users. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't silently unmount busy mounts
The propagate_mount_busy() helper exists to decide whether a synchronous
can suceed. It does that by looking at the copies of the victims in the
mounts its parent propagates to. One of those functions from propagation
hell.
It skips a copy that has child mounts except for the case of a single
child mount covering the copy's root. That algorithm used to be exact.
It isn't anymore.
Originally only childless copies were unmounted during propagation.
And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating
shadow/side mounts.") ended up adding covered mounts to both sides in
one go.
Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts
in any order") and that started to unmount more than before:
[1]: A copy of a mount is unmounted when each of its children is either
its overmount or a copy of the victim itself. In the former case
the overmount gets reparented. In the latter case the copy of the
victim will end up being unmounted.
So propagate_umount() ended up being rewritten without adjusting
propagate_mount_busy(). And currently propagate_mount_busy() doesn't
look at copies of the victim that have two or more children nor a single
child that is not the overmount.
So any such copy in [1] is not checked for
references. The result is that a synchronous unmount succeeds, pulling
out a mount that is still in use.
A container can run into this with its own mounts. The host shares a
tree with the container and the host has a mount in that tree:
mount -t tmpfs none /mnt
mount --make-shared /mnt
mount -t tmpfs none /mnt/a
The container's /mnt is a slave copy of the host mount. The container
now takes a detached copy of the tree and mounts that copy beneath its
propagated copy of /mnt/a and keeps the file descriptor to the tree
open:
unshare -m --propagation unchanged
mount --make-rslave /
fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH)
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
777 775 ... /mnt/a ... master:646
776 777 ... /mnt/a ... master:647
778 777 ... /mnt/a/a ... master:647
The now attached tree (777) is now mounted beneath the container's copy
of /mnt/a. That's also where the host mount sits (as seen from the host
mount namespace). So the propagated copy (776) of the host's mount is on
top of its root and the copy of that (778) is inside it. Now the host
runs:
umount /mnt/a
and it succeeds. The moved tree tree and the copy inside of it are gone
from the container. Now only the propagated copy is left and it got
reparented to where it was before:
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
776 775 ... /mnt/a ...
But the file descriptor still refers to the moved tree. So a synchronous
umount detached a mount that is still in use.
Teach propagate_mount_busy() the same checks that propagate_umount()
does. It now checks for a single victim mount without children
for which it can assume that MNT_LOCKED is cleared on every copy like
propagate_umount() does. The copies form chains. IOW, when a copy itself
receives propagation from the victim's parent then the mount at the same
mountpoint inside that copy is a copy as well. Whether a mount receives
propagation from the victim's can simply be checked by walking its
masters. Walk each chain once from its top so we are sure that nested
copies stay linear. Check every reference once of every copy that gets
unmounted. |
| An unauthenticated Denial-of-Service (DoS) vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation of this vulnerability results in the ability to disrupt the availability of the affected interface. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix shrinker accounting double-subtraction on nested external pins
xe_bo_pin_external() and xe_bo_unpin_external() support nested pins,
since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count
refcount rather than a boolean. However, the shrinker accounting calls
xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked
unconditionally on every pin_external()/unpin_external() call, instead
of only on the transition into and out of the pinned state.
An external BO (dma-buf) can be pinned more than once while already
pinned, for example when it has multiple attachments/importers, each
independently calling xe_bo_pin_external(). Each such nested pin
subtracts the BO's pages from the shrinker's accounting again, even
though the BO's pages were already removed from consideration by the
first pin. Symmetrically, each nested unpin adds them back again
before the BO is actually unpinned. This desynchronizes the
shrinker's page and object counts from reality, and since they are
declared as signed long but interpreted as unsigned long in
xe_shrinker_count(), the underflow can turn into an enormous
shrinkable/purgeable page count, causing the shrinker to be invoked
excessively under memory pressure.
Guard the accounting calls with the same pin-count transition checks
already used to guard the pinned_link list maintenance, so accounting
is only updated on the outermost pin and the final unpin.
While centralizing this logic into xe_bo_account_pin()/
xe_bo_account_unpin(), also close a second, related accounting gap
affecting imported dma-bufs. For an imported bo's ttm_tt, xe's
ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without
calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set
without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's
ttm_tt_populate() wrapper unconditionally marks the tt as populated
on driver-hook success, so ttm_tt_is_populated() still reports true
for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted
ttm_tt_is_populated() as a proxy for "these pages are accounted for
by the shrinker", and would subtract/add pages for such a tt that
were never added in the first place, again underflowing the
shrinker's counts. This is reachable today via xe_bo_pin_external(),
and would have become newly reachable via the fb-pin path once this
patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so
fix it here rather than in a later patch, to avoid a commit in this
series that introduces the regression before fixing it. Skip the
accounting for imported bos, using the same EXTERNAL &&
!EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate()
use to decide whether to act, via a new xe_ttm_bo_is_imported()
helper (hoisted up from its only prior use site).
v2:
- Fix the critical issue caught by Sashiko AI review: the pin-count
transition check introduced here was still bypassed by the fb-pin
path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a
stale pinned_link entry and a permanent shrinker accounting leak
when the fb-unpin performed the true last unpin. Addressed in a
separate follow-up patch in this series rather than folded in here,
since it is a distinct bug with its own Fixes: tag.
- Drop the unneeded local "last_unpin" variable in
xe_bo_unpin_external(), restoring the original inline
bo->ttm.pin_count == 1 check; it was a no-op rename not used by any
of the new accounting helpers, and was going to be deleted again by
the follow-up patch anyway.
v3:
- Exclude imported dma-bufs from the pin/unpin shrinker accounting,
fixing another underflow caught by Sashiko AI review.
- Add a short comment on the backup-object pin site noting it's
already populated/accounted at pin time, addressing (as a
false-positive clarification, no code fix needed) a separate
Medium-severity accounting-leak concern also caught by Sashiko AI
---truncated--- |
| SmileCDR HAPI FHIR does not properly handle highly compressed data, allowing an unauthenticated attacker to send compressed payloads that exhaust server heap or crash certain services when decompressed. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix memory leak in vmci_transport_recv_dgram_cb()
During the closure of a datagram socket, the vmci_transport_recv_dgram_cb()
function may be called, which will add the packets
to the socket's backlog; then, after the receive queue is cleared,
the __release_sock() function will move the packet back from the socket's
backlog to the receive queue, which will lead to a memory leak.
sock_close
__sock_release
__vsock_release
// take ownership by user-space
lock_sock_nested
sock_set_flag(sk, SOCK_DEAD)
vmci_transport_release
vmci_dispatch_dgs
vmci_datagram_invoke_guest_handler
vmci_transport_recv_dgram_cb
sk_receive_skb
if (!sock_owned_by_user(sk))
[...]
(!) else if sk_add_backlog()
[...]
(!) skb_queue_purge(&sk->sk_receive_queue)
release_sock
__release_sock
// move all packets from the backlog
// to the receive queue
(!) sk_backlog_rcv
vsock_queue_rcv_skb
[...]
__sock_queue_rcv_skb
if (!sock_flag(sk, SOCK_DEAD))
// Since the socket is "dead", the function will not
// be called
sk->sk_data_ready(sk)
sock_release_ownership(sk);
sock_put
Add a receive queue cleanup in the socket destructor to fix this.
syzkaller report:
unreferenced object 0xffff8880117bfb80 (size 240):
comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s)
hex dump (first 32 bytes):
78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&.....
00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&.....
backtrace:
[<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505
[<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport]
[<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci]
[<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci]
[<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci]
[<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205
[<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314
[<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376
[<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix devlink_rel reference leak when notify work is pending
devlink_rel_nested_in_notify_work_schedule() takes a reference on the
devlink_rel for the notify work and then queues the work, ignoring the
return value of schedule_delayed_work(). If the work is already pending,
nothing new is queued, the work runs only once and drops only one
reference, so the extra one is leaked together with the devlink_rel and
its index in devlink_rels.
This is easy to hit. devl_register() of a nested instance queues the
work, and if the instance is unregistered before the work has run,
devlink_rel_put() queues it again while it is still pending. The work
also keeps rescheduling itself for as long as the parent devlink lock
cannot be taken, which widens the window. Registering and unregistering
a nested devlink instance 100 times while holding the parent lock leaks
all 100 devlink_rel objects.
The reschedule path in devlink_rel_nested_in_notify_work() has the same
problem: if the work was queued again while it was running, the
reference it holds is never dropped.
Drop the reference in both places when the work was already pending.
The pending work holds its own reference, so this can not be the last
one. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix the program leak when XDP is replaced
We need to release the reference on the old BPF prog, whether
we are going to no-prog, or replacing the prog with another.
Spotted by AI while running tests for the propagation series
(leaked programs were accumulating). Selftest will come in
the net-next series to avoid conflicts. |
| IBM MQ could allow an authenticated attacker to cause a denial of service due to improper validation of RFH2 message header fields in queued publish/subscribe operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| Missing release of memory after effective lifetime in Remote Desktop Gateway Service allows an unauthorized attacker to deny service over a network. |
| Wasmtime 47.0.0 before 48.0.3 and 49.0.0 before 49.0.1 contains a fuel accounting flaw in Cranelift-compiled call_ref and try_table catch paths. Malicious guests can reset consumed fuel after calls to run exponentially long on linear fuel, evading timeouts and periodic yields for denial of service. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated users to bypass the configured maximum attachment file size when using the server-side “Download external file” attachment feature. When server-side attachment downloads are enabled, Part-DB downloads the remote file and streams it directly to disk without enforcing the configured MAX_ATTACHMENT_FILE_SIZE limit. As a result, an authenticated user who can create or edit attachments can cause Part-DB to store files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated API users to bypass the configured maximum attachment file size by uploading attachments through the API using base64-encoded file data. The application enforces the configured attachment size limit for normal browser-based file uploads, but the API base64 upload path does not apply the same size validation. As a result, an authenticated user with API access and permission to create attachments can upload files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
