| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mattermost versions 11.7.x <= 11.7.10 fail to apply outbound internal-connection filtering to the OpenID discovery endpoint request which allows a System Administrator to determine whether internal addresses and ports are reachable from the server via an unauthenticated login request that triggers the discovery fetch.. Mattermost Advisory ID: MMSA-2026-00774 |
| Interpretation Conflict vulnerability in hackney_url in benoitc hackney allows Server Side Request Forgery via a percent-encoded bracketed IPv6 literal or an IP literal with a trailing dot. A host such as %5B%3A%3Affff%3A127%2E0%2E0%2E1%5D (decoding to [::ffff:127.0.0.1]) or 127.0.0.1. is not an IP address to a caller's allowlist built on uri_string:parse/1 and inet:parse_address/1, while hackney connects to the address it denotes. The same applies to a Location target when redirects are followed.
The IP-literal gate that hackney_url:normalize/2 applies to a percent-decoded host, added to close the percent-encoded IP bypass of CVE-2026-47076, passes the decoded value to inet_parse:address/1 as is. The connect path in hackney_happy:parse_address/1 drops a surrounding bracket pair, and the resolver ignores a trailing dot, so both forms pass the gate and still reach the literal address. Domain names with a trailing dot and unencoded IPv6 literals are not affected.
This issue affects hackney: from 4.0.1 before 4.9.0. |
| MacCMS v10 through 2026.1000.4056 contains a mass assignment vulnerability in index/Comment::saveData() that allows unauthenticated attackers to set arbitrary mac_comment columns including user_id. Attackers can submit anonymous comments with a crafted user_id parameter to attribute them to any registered member, displaying that member's avatar and impersonating them. |
| An issue in Matomo v.5.11.2 allows a remote attacker to obtain sensitive information via the SiteContentDetector / SitesManager component. NOTE: the Supplier disputes the relevance of this report because the site administrator is a trusted party, and would not plausibly set main_url to a URL that offers additional information to an adversary. |
| Server-side request forgery (ssrf) in Azure AI Foundry allows an authorized attacker to elevate privileges over a network. |
| A vulnerability was determined in Kameleo up to 5.0.1.26. Affected is the function InternalController.TestProxy of the file client-engine-application/f.cs of the component Proxy Validation. Executing a manipulation of the argument host/port can lead to server-side request forgery. The attack may be launched remotely. Upgrading to version 5.2.0 is able to address this issue. It is suggested to upgrade the affected component. The route has been removed and replaced with /general/test-proxy in 5.2.0. |
| Frappe Builder before 1.36.1 contains a server-side request forgery vulnerability in builder/api.py where the assert_not_private_url() guard validates only the initial hostname before callers invoke requests.get(url) with default redirect-following and no IP pinning, allowing an attacker-supplied public URL to HTTP-redirect to internal or link-local addresses the guard never validated. An authenticated attacker can call the convert_to_webp endpoint, which lacks a permission decorator, with a URL that redirects to internal targets such as cloud metadata services to perform SSRF, internal port scanning, or trigger a request-hang denial of service due to the missing timeout. |
| Frappe Builder versions before 1.36.1 contain a server-side request forgery vulnerability in the convert_to_webp API endpoint, which lacks the has_page_write access control applied to similar asset-ingest handlers and performs an unprotected requests.get call that follows redirects without re-validating resolved IP addresses. A low-privilege authenticated user can supply an image_url pointing to an internal address or use DNS rebinding and open redirects to make the server fetch internal network resources or cloud metadata endpoints, with successful image responses saved to a world-readable /files/ URL enabling data exfiltration or blind probing of internal hosts. |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. |
| A vulnerability was found in geesondog RhaPHP up to 7ae639ccf8dcb627faace096d030bd4cb4cfb905. Affected by this vulnerability is the function image of the file application/mp/controller/Show.php of the component Mp Module Media Proxy. The manipulation of the argument url results in server-side request forgery. The attack may be launched remotely. The exploit has been made public and could be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in fr0tt benotes up to 2.8.1. This affects the function getUrlInfo of the file app/Http/Controllers/PostController.php of the component Bookmark Metadata Endpoint. The manipulation of the argument url leads to server-side request forgery. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in EyouCMS up to 1.8.3. This impacts the function remote_file_to_local of the file application/function.php. Executing a manipulation can lead to server-side request forgery. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| rclone from 1.37 before 1.74.2 contains a server-side request forgery vulnerability that allows unauthenticated attackers to redirect http and netstorage backend requests by supplying a double-slash root on an existing named remote via --rc-serve. Attackers can make HEAD/GET requests to attacker-chosen hosts to read responses, capture configured custom headers, or obtain valid NetStorage request signatures. |
| vLLM from 0.9.2 before 0.24.0 contains a server-side request forgery vulnerability that allows API callers to force outbound connections by embedding a decode address in the X-Request-Id header. Attackers can make a P2pNcclConnector prefill worker ZMQ-connect to an attacker host, leaking the NCCL unique_id and KV-cache tensors or blocking the worker. |
| A flaw has been found in KodCloud KodExplorer up to 4.56. Affected is the function request_url_safe of the file app/function/web.function.php of the component Remote Download. This manipulation causes server-side request forgery. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Firecrawl before 2.11.586 contains a server-side request forgery vulnerability in the Playwright service SSRF proxy that allows attackers to bypass isInternalHost checks via DNS rebinding. Attackers controlling DNS for a scrape target can return a public address during validation and a private address at connect time, retrieving cloud metadata and internal resources through the scrape API. |
| A security vulnerability has been detected in SH3. This affects an unknown function of the component Módulo de Gestão/Módulo de Arrecadação. The manipulation leads to password hash with insufficient computational effort. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The exploit has been disclosed publicly and may be used. Upgrading to version 2026.0.2.0 mitigates this issue. Upgrading the affected component is recommended. |
| YesWiki before 4.7.0 contains an unauthenticated server-side request forgery vulnerability that allows remote attackers to fetch arbitrary URLs by supplying [[|URL]] wiki syntax to the render handler. Attackers can pass the syntax in the content parameter of the page render handler to reach internal hosts and ports and read their responses. |
| phpMyFAQ before 4.1.10 contains a server-side request forgery vulnerability in the PDF export feature that fetches external images referenced in FAQ answers. Attackers who can influence FAQ content can embed image URLs pointing to loopback or internal services, causing the server to request them and embed responses in generated PDFs. |
| rotki before 1.44.2 contains a weak key derivation vulnerability that allows attackers to brute-force backups because the premium sync key is a single unsalted SHA-256 of the user password. Attackers who obtain an uploaded backup blob can run GPU-parallel offline password guessing and decrypt the database containing exchange API keys, secrets, wallet addresses and transaction history. |
