Export limit exceeded: 25995 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25995 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98119 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: break unbuffered write when netfs_alloc_subrequest() fails syzbot reported a null-ptr-deref below [1] following a fault injection in netfs_alloc_subrequest(). [0] When netfs_alloc_subrequest() fails, subreq is NULL. Later, netfs_prepare_write() tries to initialize members of subreq(e.g., source), the issue in [1] is triggered. Let's handle the error of netfs_prepare_write() properly. [0] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 Call Trace: netfs_alloc_subrequest+0x116/0x3f0 netfs_prepare_write+0x76/0x7b0 netfs_unbuffered_write+0x75c/0x2020 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 netfs_unbuffered_write_iter+0x442/0x720 v9fs_file_write_iter+0xbf/0x100 vfs_write+0x6ac/0x1050 [1] KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173 Call Trace: netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290 netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382 v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409 new_sync_write fs/read_write.c:595 [inline] | ||||
| CVE-2026-98120 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the event that subreq->io_iter ends up zero length during preparation. | ||||
| CVE-2026-98140 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local leak in write_mft_record_nolock() error paths write_mft_record_nolock() maps the MFT record folio with kmap_local_folio(), but the pre_write_mst_fixup() and bio_add_folio() failure paths jump to the error label without unmapping it. kmap_local mappings are stack-ordered per task, so leaking one corrupts the nesting for any outer mapping. Unmap the folio on those error paths too. | ||||
| CVE-2026-98143 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | ||||
| CVE-2026-98144 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | ||||
| CVE-2026-98145 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | ||||
| CVE-2026-99094 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descriptor bounds check btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data buffer arrays before the index is advanced modulo txq->count. An index equal to txq->count is one past the end of both arrays, so reject it in the bounds check. | ||||
| CVE-2026-99095 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: drain the hangcheck timer and works on V3D unbind Nothing stops the hangcheck timer that submitted jobs arm, or the job_done_work that the render-done interrupt queues, at teardown: vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy() runs from the drm-managed release, after vc4_v3d_unbind() has already uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed by then reads V3D registers through the NULL vc4->v3d pointer, and the late callbacks run on the vc4_dev embedding them after it has been freed. Drain them in vc4_v3d_unbind(): shut the timer down and cancel reset_work before the interrupt is taken down, because its vc4_irq_reset() re-enables it, then flush job_done_work so that completions queued at teardown still release their jobs. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-99090 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) | ||||
| CVE-2026-99091 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after. | ||||
| CVE-2026-99092 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map(). | ||||
| CVE-2026-99093 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: don't schedule deferred kernel page table freeing while booting Booting with a boot-time function tracer and a filter, for example ftrace=function ftrace_filter=pud_free_pmd_page panics on 7.3-rc4 as soon as the tracer starts: [ 23.531178] Starting tracer 'function' [ 23.675800] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN NOPTI [ 23.819917] KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] [ 23.964025] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.3.0-rc4-fe2ec83746e5-with-fixes-v2+ #195 PREEMPT(undef) [ 24.252248] RIP: 0010:__queue_work+0xab/0xf00 [ 25.981629] Call Trace: [ 26.125727] <TASK> [ 26.413912] ? pagetable_free_kernel+0x20/0x120 [ 26.990283] queue_work_on+0x97/0xf0 [ 27.134382] __cpa_collapse_large_pages+0x501/0x6f0 [ 27.566662] cpa_flush+0x394/0x620 [ 27.998953] change_page_attr_set_clr+0x321/0x4a0 [ 29.151729] set_memory_rox+0xa2/0xf0 [ 29.584018] create_trampoline+0x431/0x6f0 ... [ 44.343347] Kernel panic - not syncing: Attempted to kill the idle task! The boot-time tracer is started from early_trace_init(), which runs before workqueue_init_early(). Making its trampoline read-only splits a large page, and CPA collapses it again right away. The split table has been a kernel page table since commit 9e4a3ec3411b ("x86/mm/pat: Allocate split page tables as kernel page tables"), so the collapse frees it through pagetable_free_kernel(), which queues work on system_percpu_wq - still NULL at that point. That commit is correct in itself; it only lets CPA reach pagetable_free_kernel() before the workqueue that function relies on exists. Keep putting the table on the list, but don't schedule the work while the system is still booting. A core_initcall schedules it once to free whatever was queued by then. | ||||
| CVE-2026-99089 | 1 Linux | 1 Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove. | ||||
| CVE-2026-99096 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/register: don't exempt disabled rings from task restrictions A ring created with IORING_SETUP_R_DISABLED is exempt from its register restrictions until it is enabled. This lets the creator register the restrictions and then enable the ring with IORING_REGISTER_ENABLE_RINGS, whether or not that opcode is in the allowed set. Since commit ed82f35b926b ("io_uring: allow registration of per-task restrictions"), a ring also inherits restrictions from the task that creates it, and the same exemption applies to those. A task whose register opcodes are restricted can therefore create a disabled ring, issue any register opcode on it, and then enable it. Mark rings whose restrictions were inherited from the task, and keep checking register opcodes for them while the ring is disabled. Enabling such a ring now requires IORING_REGISTER_ENABLE_RINGS to be in the task's allowed set. Per-ring restrictions registered on a disabled ring work as before. [axboe: amend with inheritance flag fixup] | ||||
| CVE-2026-99098 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix buffer overflow in inline mode with large tag size In inline mode, dm_integrity_check and dm_integrity_inline_recheck compute the checksum of each block into an on-stack buffer of HASH_MAX_DIGESTSIZE bytes. integrity_sector_checksum pads its result with zeroes up to the tag size, so if the tag size is larger than HASH_MAX_DIGESTSIZE, the padding runs past the end of the buffer. With CONFIG_STACKPROTECTOR the kernel panics in dm_integrity_check on the first read. Enlarge both buffers to hold MAX_TAG_SIZE bytes, as commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size") did for integrity_metadata. Note that this is not a security bug because the buffer overflow can only be triggered by root. | ||||
| CVE-2026-63859 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue() Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. | ||||
| CVE-2026-63861 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal. | ||||
| CVE-2026-63862 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found In mtk_pcie_setup_irq(), the IRQ domains are allocated before the controller's IRQ is fetched. If the latter fails, the function directly returns an error, without cleaning up the allocated domains. Hence, reverse the order so that the IRQ domains are allocated after the controller's IRQ is found. This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI: mediatek-gen3: add power control support". | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-63865 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks bpf_lsm_task_to_inode() is called under rcu_read_lock() and bpf_lsm_inet_conn_established() is called from softirq context, so neither hook can be used by sleepable LSM programs. | ||||