| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
| Generation of error message containing sensitive information in Windows NTFS allows an authorized attacker to disclose information locally. |
| A flaw was found in Keycloak. A remote attacker can exploit differential error messages during the identity-first login flow when Organizations are enabled. This vulnerability allows an attacker to determine the existence of users, leading to information disclosure through user enumeration. |
| IBM Concert 1.0 through 3.0.0 allows information disclosure through exposure of schema suggestions. |
| Overly informative error messages in the catalog functionality of KNIME Business Hub prior to version 1.18.5 may allow an authenticated remote attacker to see workflow names if their ID is known. A workaround is not possible. |
| llama.cpp builds b4882 before b8487 contain an out-of-bounds read vulnerability in the recurrent memory state restore path that allows attackers with write access to the slot save directory to read memory past the end of the allocated cells array. Attackers can craft a malicious slot file with an oversized seq_id value to trigger an out-of-bounds read that leaks heap data including pointer values into server logs, defeating ASLR protections and facilitating further exploitation. |
| Internal Application Information Exposure Vulnerability in Hitachi Ops Center Administrator.
This issue affects Hitachi Ops Center Administrator: before 11.0.9-01. |
| webpack-dev-server is a development server that provides live reloading for webpack projects. In versions from 5.1.0 before 5.2.7 and in version 6.0.0, the unauthenticated open-editor endpoint validates the Host header with a regular expression meant for browser Origin schemes, so a Host value beginning with file: or with an extension scheme short-circuits the hostname and allowedHosts checks. A network peer that can reach the dev server can send a request with a malformed Host that passes validation and then causes the endpoint's URL construction to throw, and in the default non-production mode the server returns an HTTP 500 body containing the full exception stack trace, which discloses absolute filesystem paths, installed module locations, and internal source line numbers. The server keeps running, so there is no denial of service. The issue is fixed in webpack-dev-server 5.2.7 and 6.1.0, and users should upgrade to one of those versions or later. |
| Vite is a frontend tooling framework for JavaScript. From 8.2.0 until 8.2.4 and 8.3.3, the first 4 bytes of files outside of server.fs setting can be returned to the browser by a request containing ?vite-wasm-instance. Requests containing the ?vite-wasm-instance query are handled by the internal Wasm plugin's load hook. The hook removes the query and reads the resulting path directly from disk, but the server.fs checks were not applied. After reading the file, Vite attempts to parse it as WebAssembly. When that parse fails, Node and deno throws an error that contains the first 4 bytes of the file. This vulnerability is fixed in 8.2.4 and 8.3.3. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE(). |
| A vulnerability was determined in a2aproject a2a-rs up to 0.4.3. This issue affects some unknown processing of the file a2a-server/src/error.rs. Executing a manipulation can lead to information exposure through error message. The attack can be executed remotely. This patch is called 713b943af94ab2d521d483b841618b97a2e78a4d. A patch should be applied to remediate this issue. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.35.0, ConnectionFactoryConfigurator.load() includes the raw uri value in wrapped exceptions when AMQP URI parsing fails. Because the URI may contain a plaintext username and password, startup logs, application performance monitoring systems, CI logs, and copied stack traces can disclose broker credentials to users who should not have access to them. This issue is fixed in version 5.35.0. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CXF component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When a route behind a CXF SOAP consumer failed with an exception the service contract does not declare, the exception was described back to the SOAP client in the fault: CXF copies the message into the SOAP faultstring, and can be configured to place the stack trace in the fault detail. An external caller able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever the exception message carries. Declared faults, annotated @WebFault, are a different matter: those are part of the published contract that clients are written against, and suppressing them would break the service rather than protect anything.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces an undeclared route failure with a generic fault carrying no class name, message or stack trace. Faults the contract declares are reported exactly as before. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, declare the exceptions the service is allowed to report and map every other failure onto one of them in an onException handler, so no undeclared exception reaches the fault. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description. |
| Generation of Error Message Containing Sensitive Information vulnerability in Gantry Gantry 5 Framework gantry5 allows Retrieve Embedded Sensitive Data.This issue affects Gantry 5 Framework: from n/a through 5.6.4. |
| DeepSeek V4 is vulnerable to Incorrect Access Control via a crafted input. |
| Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to read internal Elixir terms from an RPC error response by provoking an error the error builder has no dedicated clause for.
AshTypescript.Rpc.ErrorBuilder.build_error_response/1 in lib/ash_typescript/rpc/error_builder.ex renders a pipeline error term that matches no specific clause with inspect/1 and places the result in details.error of the client-facing error. Ash exceptions take a separate path in AshTypescript.Rpc.Errors where unhandled cases are redacted behind an errorId, but these fallbacks have no redaction, so whatever the term carries reaches the HTTP or channel response. Two request paths hand it such terms: a struct-typed action argument with an invalid nested value, where cast_map_to_struct/2 in lib/ash_typescript/rpc/input_formatter.ex throws the raw Ash.Type cast error into the builder, and field selection on a generic action that returns a primitive, where format_field_type/1 inspects the full Ash.Info.Manifest.Type struct into vars.returnType. Resource module names in vars.resource are not treated as sensitive and are out of scope.
This issue affects ash_typescript: from 0.1.0 before 0.19.1. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does not implement the formatstatus/2 callback. When these processes crash (e.g., due to network partitions, connection failures), the OTP SASL error handler writes the full process state , including plaintext AMQP passwords and URIs , to the error log. This is particularly severe for the shovel worker, which stores deobfuscated plaintext URIs (including amqp://user:password@host format) in its genserver state for the entire process Automatic Credential Exposure: Shovel worker crashes (common during network partitions) automatically write plaintext upstream/downstream passwords to error logs No Special Configuration Needed: Unlike DEBUG logging, SASL error reports are always active Broad. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
