| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| vLLM is an inference and serving engine for large language models. From 0.11.1 until 0.32.0, the DeepSeek-OCR, DeepSeek-OCR-2, and Unlimited-OCR image path allows a remote client that can reach the OpenAI-compatible API to submit a legal image whose normalized pixels sum to zero when that image is alone in its per-step encoder batch. _parse_and_validate_image_input returns no embedding, embed_multimodal propagates that value, and sanity_check_mm_encoder_outputs triggers a fatal assertion that shuts down the engine for all users. This issue is fixed in version 0.32.0. |
| The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer.
The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path.
On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations. |
| A local file disclosure vulnerability in the XInclude processing component of Inkscape 1.1 before 1.3 allows a remote attacker to read local files via a crafted SVG file containing malicious xi:include tags. |
| A security flaw has been discovered in ggml-org llama.cpp up to 0.7.0. Affected by this vulnerability is an unknown functionality of the file src/llama-sampler.cpp of the component Mirostat Sampler. The manipulation results in reachable assertion. It is possible to launch the attack remotely. The project was informed of the problem early through a pull request but has not reacted yet. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel Saxon component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
XQueryBuilder in camel-saxon, which evaluates expressions for the xquery language and the xquery component, built its default Saxon Configuration with parse options that set only a whitespace stripping rule, leaving the XML parser at its defaults, under which a DOCTYPE declaration is accepted and external entities are resolved. A message body of type String or byte[], or any body read as an InputStream, is first turned into a javax.xml.transform.Source by Camel's own XML type converters, which configure the parser against external entities, so those bodies were not affected. A body that was already a Source, however, was handed to Saxon unchanged, and when that Source still had to be parsed, as a stream-based Source does, Saxon parsed it with that Configuration, bypassing the protection applied to the other body types. Such a body arises, for example, after a route converts the message with convertBodyTo(Source.class), or when a component or processor earlier in the route sets the body to a stream-based Source. A DOCTYPE with an external subset, or an external entity, declared in that body was therefore resolved and expanded into the document the expression was evaluated against. An external sender whose XML reaches an XQuery expression or an xquery endpoint in that form could read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since the default Configuration is used whenever the route does not supply one of its own.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, as well as the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not evaluate XQuery over a message body that is already a javax.xml.transform.Source when that body carries XML from an untrusted sender, or set the configuration option of the xquery endpoint or language to a Saxon Configuration whose parse options refuse a DOCTYPE declaration and disable external entities and external DTD loading, which is what the fixed releases now apply by default. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 7.2.0 until 9.0.0, ZipArchive::extract and ZipArchive::extract_unwrapped_root_dir use safe_prepare_path in src/read/zipfile.rs and simplified_components in src/path.rs to validate symbolic link targets with a lexical prefix comparison rather than resolving each intermediate link. An attacker who knows or can guess the absolute extraction destination can create a chain whose apparent target remains under the destination while an intermediate symlink resolves outside it, allowing attacker-controlled files to be created or overwritten with the extracting process's privileges. On Windows, discarded drive and UNC prefixes can permit a single-link escape when the process has SeCreateSymbolicLinkPrivilege, such as through administrator rights or Developer Mode. This regression is distinct from CVE-2025-29787. This issue is fixed in version 9.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| A path traversal vulnerability in Flatpak's handling of the files/etc directory during app deployment allows a malicious Flatpak app to cause certain host system files (such as passwd, group, machine-id, or resolv.conf) to be emptied or replaced with a symlink when the app is installed or upgraded. In system-wide installations, the write is performed as root. |
| A path traversal vulnerability in Flatpak's handling of the export/bin directory during app deployment allows a malicious Flatpak app to cause deletion of attacker-chosen files outside the deployment directory when the app is installed or upgraded. In system-wide installations, the deletion is performed as root. |
| A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: don't put a mountpoint on a dentry that's being removed
rmdir(), unlink() and rename() call dont_mount() on the victim and then
detach_mounts() with the victim's inode locked. do_lock_mount() takes
the inode lock of the mountpoint and checks cant_mount() so a mount
can't show up after detach_mounts().
But attach_recursive_mnt() makes a second mountpoint for the root of the
source mount so that the mounts already located at the destination can
be put on top of it. No inode is locked for that one and d_set_mounted()
only refuses a dentry that is unlinked. Between detach_mounts() and
d_delete() the victim is still hashed:
rmrace: b passed dont_mount() and detach_mounts(), sleeping
T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 ()
T1: rmdir(/tmp/plcant/d/b) = 0 errno 0
109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw
108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw
A bind mount of the directory that's being removed is moved beneath an
existing mount while the rmdir() is located between the two calls. The
mount ends up on the removed directory and nothing will ever detach it.
Check cant_mount() in d_set_mounted() as well. dont_mount() raises the
flag under d_lock before detach_mounts() runs so either the mountpoint
is set first and detach_mounts() finds the mount or the flag is seen and
the mount is refused. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. Prior to 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0, XmlScanner::scan in src/PhpSpreadsheet/Reader/Security/XmlScanner.php uses a DOCTYPE detection pattern that accounts for NUL-byte interleaving but not ISO-2022 escape sequences in XLSX XML parts. The escape sequences prevent the scanner from matching the declaration, and XML charset normalization then removes the escape bytes before parsing, exposing a valid DOCTYPE and entity definitions. Processing an attacker-controlled XLSX can therefore cause entity-expansion denial of service on supported PHP versions and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. From 3.3.0 until 3.10.8 and 5.10.0, Reader\Xml passes stored SpreadsheetML XML through XmlScanner::scan in Xml::canRead and Xml::trySimpleXMLLoadStringPrivate, while Xml::unentity decodes numeric entities only after each DOCTYPE pattern check. A double-encoded less-than character is reduced by the first callback to another encoded character and by the second callback to a literal less-than sign, so SimpleXML receives an unchecked DOCTYPE and entity declaration. Processing attacker-controlled SpreadsheetML XML can cause entity-expansion denial of service and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 3.10.8 and 5.10.0. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not verify, when renewing a token issued by the Kubernetes Auth method, that the service account token originally used to authenticate is still valid. An authenticated attacker can keep renewing such tokens to persist access after the Kubernetes service account has been deleted. |
| Django REST framework is a toolkit for building Web APIs. From 3.12.0 until 3.18.2, TokenProxy.delete() in rest_framework/authtoken/models.py uses the proxy's user-id pk while the concrete Token token-string primary key identifies rows, so Django issues a deletion query that matches no row and reports zero deletions without raising an error. Applications, administrative integrations, or operational scripts that revoke credentials through a TokenProxy instance can therefore believe revocation succeeded while the token remains live and continues authenticating. DRF's own TokenAdmin.delete_model workaround is not affected, but other callers can leave access available indefinitely because DRF tokens do not expire automatically. This issue is fixed in version 3.18.2. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Fw::FilePacket deserialization used by Svc::FileUplink is vulnerable because Header deserialization casts the byte to the Type enum without validating its range and FilePacket::fromSerialBuffer reaches a default FW_ASSERT. When a network file packet contains an unknown file-packet type byte, the assertion aborts or resets the default Ref application process, causing denial of service. This issue is fixed in version 4.2.0. |
